Sharp AL-1661CS Operation Manual page 79

Adding a original to polling memory:
Use this procedure to add an original to another
original that has already been scanned into polling
memory. Place the original in the RSPF or on the
document glass and follow the steps below.
1
Press the [MENU] key.
2
Press the [ ] key (
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
Selection
"7:MEMORY POLL MODE"
3
Press the [ ] key (
until "1:SET" appears, and then press
the [ENTER] key.
Selection
"1:SET"
4
Press the [ ] key (
to select the number of times polling
transmission will take place and press
the [ENTER] key.
5
Press the [START] key (
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
"1:TIME" or "2:REPEAT"
can be selected as the
number of polling
operations allowed.
).
Deleting originals from polling memory:
Follow the steps below to delete originals that have
been scanned into polling memory.
1
Press the [MENU] key.
2
Press the [ ] key (
until "7:MEMORY POLL MODE"
appears, and then press the [ENTER]
key.
Selection
"7:MEMORY POLL MODE"
3
Press the [ ] key (
until "2:CLEAR" appears, and then
press the [ENTER] key.
Selection
"2:CLEAR"
4
Press the [START] key (
SPECIAL FUNCTIONS
) or [ ] key ( )
) or [ ] key ( )
5
).
75