When Using Manual Sending And Receiving - Sharp AL-1661CS Operation Manual

WHEN USING MANUAL SENDING
AND RECEIVING
You need to use the [SPEAKER] key or an extension telephone to perform manual sending and receiving. For
information about connecting an extension telephone See "CONNECTING OTHER DEVICES" (p.12).
1
When the extension telephone rings,
pick up the handset and converse.
If the [SPEAKER] key is used to answer a call
you cannot converse.
You cannot use the [SPEAKER] key for fax
Note
transmission/reception while copying is in
progress.
2
When the handset is off hook or the
[SPEAKER] key is used, press the
[START] key ( ).
When there are originals in the RSPF, the
machine senses the presence of the originals and
displays the message.
MANUAL MODE
1:SEND,
Press the [ ] key (
select "1:SEND" or "2:RECEIVE", and then press
the [START] key ( ).
2:RECEIVE
) or [ ] key ( ) to
4
65