Sharp AL-1661CS Operation Manual page 85

To store junk fax numbers, use the following procedure:
1
Press the [MENU] key.
2
Press the [ ] key (
until "5:ANTI JUNK FAX" appears, and
then press the [ENTER] key.
Selection
"5:ANTI JUNK FAX"
3
Press the [ ] key (
to select "2:JUNK FAX #" and press
the [ENTER] key.
Selection
"2:JUNK FAX #"
4
Press the [ ] key (
to select "1:SET" and press the
[ENTER] key.
Selection
"1:SET"
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
5
Enter a two-digit number from 01 to 10
that will identify the anti junk number
and press the [ENTER] key.
If you enter a two-digit number that already
Note
has a fax number stored, "#xx
STORED:CHANGE?" will appear. To
change the fax number that has been stored
under that 2-digit number, press the [
key ( ) or [
press the [ENTER] key, and enter the new
fax number.
6
Enter the fax number with the numeric
keys and press the [ENTER] key.
7
Press the [CLEAR ALL] key (
SPECIAL FUNCTIONS
]
] key ( ) to select "YES",
).
If you wish to store
another fax number,
return to step 5.
Press the [CLEAR ALL]
key ( ) to exit.
81
5