Sharp AL-1661CS Operation Manual page 14

SELECTING SETTINGS FOR THE FUNCTION
The general procedure for configuring settings for the fax function is explained below. Follow this procedure to
configure the settings explained on pages 6 through 9.
An item can also be selected after pressing the [MENU] key by pressing the numeric key for the item (the key
Note
corresponding to the number that appears in front of the item). When the numeric key is pressed, the item is
selected or entered.
1
Press the [MODE SELECT] key to
select fax mode.
R
2
Press the [MENU] key.
3
Press the [ ] key ( ) or [
key to select a menu item and press
the [ENTER] key.
10
The "FAX" indicator lights
up to indicate that fax
mode is selected.
"FAX MAIN MANU" will
appear in the display.
] key ( )
The item is selected.
Repeat this step until the
item that you wish to
configure appears.
4
Select a setting or enter information
• If you mistakenly select the wrong item,
Note
press the [CLEAR] key (
the procedure from step 2.
• To cancel a setting for a fax function,
press the [MENU] key.
5
Press the [ENTER] key
6
Press the [CLEAR ALL] key (
To select a setting:
Press the [ ] key ( )
or [ ] key ( ) until the
setting is selected.
To enter information:
Press the numeric keys
to enter characters or
numbers.
) and repeat
The setting or information
is entered.
)
Press the [CLEAR ALL]
key ( ) to exit.