Sharp AL-1661CS Operation Manual page 38

INITIAL SETTINGS
When a communication error occurs
You can select the interval between recall attempts when a communication error occurs. An interval from 0 to 15
minutes can be selected. If "00" is selected, the machine will not make any recall attempts.
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "11:RECALL INT. ERR" appears,
and then press the [ENTER] key.
Selection
"11:RECALL INT. ERR"
4
Press the numeric keys to select the
recall interval.
5
Press the [ENTER] key.
34
) or [ ] key ( )
) or [ ] key ( )
Enter the recall interval
("00" to "15").
6
Press the [CLEAR ALL] key ( ).
Press the [CLEAR ALL]
key ( ) to exit.