Setting The Date And Time - Sharp FO-DC500 Facsimile Operation Manual

Setting the Date and Time

The date and time appear in the display, in reports, and at the top of each
page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below.
1
MENU
Press
until ENTRY MODE is selected in the
display.
2
START/
Press
ENTER
until DATE&TIME SET is selected.
3
START/
Press
ENTER
4
Enter a two-digit number for the day ("01" to "31").
Example: The 5th
•
To correct a mistake, press
then enter the correct number.
5
Enter a two-digit number for the month ("01" for January, "02" for
February, "12" for December, etc.).
Example: March
and then or
and then or
.
The currently
set date and
time appear
5
0
3
0
Setting the Date and Time
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
ENTRY MODE
01:DESTINATION SETTING
02:PASSCODE SETTING
03:OWN PASSCODE SET
04:DATE&TIME SET
DATE&TIME SET MODE
10-01-2003
TIME 11:35
to move the cursor back to the mistake and
29