Setting Up The Machine For Use Witha Pc Modem - Sharp AL-1661CS Operation Manual

SETTING UP THE MACHINE FOR USE WITH A PC
MODEM
The machine is set to automatically begin reception if you pick up from an extension telephone and the machine
detects a fax tone. However, if you are using a modem on the same line, you must deactivate this function:
otherwise the machine will mistakenly attempt to receive the transmission from your computer. To turn off the Fax
Signal Receive function, follow the procedure below.
If you turn off the Fax Signal Receive function, be sure to activate the Remote Reception function. See "USING
Note
THE REMOTE RECEPTION FUNCTION" on page 38 for details on how to do this.
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "15:FAX SIGNAL RCV" appears,
and then press the [ENTER] key.
Selection
"15:FAX SIGNAL RCV"
4
Press the [ ] key (
to select "1:ON" or "2:OFF".
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
5
Press the [ENTER] key.
6
Press the [CLEAR ALL] key (
INITIAL SETTINGS
).
Press the [CLEAR ALL]
key ( ) to exit.
37
2