Safety devices
Before starting the machine, all safety devices must be installed properly and operational. Manipulating the
safety devices is prohibited.
Protective devices may only be removed after
The excavator is standing still and the engine is stopped
and secured against restarting (starter switch in STOP position and key removed).
Locking the control lever K008-3/U10-3
If the control lever lock (1) is located in the upper position, the
control lever functions are locked and out of service.
Make sure that all controls are in the neutral posi-
tion and that the control levers are locked.
The hydraulic functions for driving, setting the track
width, operating the dozer, swinging the boom and
operating the auxiliary port are not locked by the
control lever lock and can be activated.
To release the control lever, place the control lever lock into
the lower position.
Locking the control lever U10-3 SIDE LEVER
If the control lever console (1) is elevated, the control lever
functions are locked and out of service.
The hydraulic functions for driving, setting the track
width, operating the dozer, swinging the boom and
operating the auxiliary port are not locked by the
control lever lock and can be activated.
Swivel down the control lever console to release the control
lever.
24
Safety rules
W9212-8235-4
03/2019