Safety Devices; Locking The Controls; Engine Emergency Stop - Kubota U50-5 Operating Instructions Manual

Safety devices

Before starting the machine, all safety devices must be installed properly and operational. Manipulating the safety
devices is prohibited.
Protective devices may only be removed after
the machine is standing still and the engine is stopped

and secured against restarting (starter switch in STOP position and key removed).


Locking the controls

If the left control console (1) is completely raised with the control le-
ver lock (2), the hydraulic functions of the control lever, the drive le-
ver, the boom swing pedal, the dozer control lever and the auxiliary
port are locked. This circumstance allows safe getting on and off.
To unlock the hydraulic functions, lower the control console

completely using the control lever lock.

Engine emergency stop

The engine is stopped when the main key switch is turned to the
STOP position.
If the engine cannot be turned off, please operate the engine emer-
gency stop knob in order to turn off the engine.
To stop the engine:
Pull the knob (1) until the engine stops.

After the engine has stopped, push in the knob.

30
Safety rules
2 2
1 1
1 1
KX060-05_003
KX060-05_004
W9272-8135-1
05/2020