Adjusting The Track Width Of The K008-3 - Kubota K008-3 Operating Instructions Manual

Operation

Approach overhangs and edges of ditches carefully as they
could cave in.

Drive slowly downhill, do not allow the vehicle speed to
increase uncontrollably.

When driving, the bucket should be approx. 200 to 400 mm
(A) above the ground (see figure).

Raise the dozer blade to the top position by pulling the
dozer control lever (1) back.

Select an appropriate engine speed.

Adjusting the track width of the K008-3

For models with extendable track width, adjust the desired track
width prior to operation. To do this:

Move the selector lever for the dozer/extendable track width
(1) fully to the right (figure position
To change the track width, both track width cylin-
ders need to be either fully extended (standard
track width) or retracted (narrow track width).
W9212-8235-4
03/2019
).
65