Start-Up After Taking Out Of Service - Kubota K008-3 Operating Instructions Manual

Hide thumbs Also See for K008-3:
Table of Contents

Advertisement

Start-up after taking out of service

If necessary, clean the excavator thoroughly.
Check the hydraulic oil for condensate water, replacing the oil if necessary.
Install the battery (page 109).
Check the safety devices for proper operation.
Carry out pre-operational services (page 55). If defects are detected whilst starting the machine, the exca-
vator may only be started up after the defects have been repaired.
If the safety inspection is due while the vehicle has been taken out of service, the inspection must be per-
formed before start-up.
Start the engine (page 61). Run the excavator at idle and check all functions.
122
Taking out of service and storage
W9212-8235-4
03/2019

Advertisement

Table of Contents
loading

This manual is also suitable for:

U10-3

Table of Contents