Safety Devices; Locking The Controls; Engine Stop Knob - Kubota KX027 Operating Instructions Manual

Safety devices

Before starting the machine, all safety devices must be installed properly and operational. Before starting the ma-
chine, all safety devices must be installed properly and operational. Manipulating the safety devices is prohibited.
Protective devices may only be removed once
the excavator is standing still and the engine is stopped

and secured against restarting (starter switch in STOP position and key removed).


Locking the controls

If the left control console (2) is raised completely with the control le-
ver lock (1), then the hydraulic functions of the following controls will
be locked:
Function
Auxiliary port pedal
Boom swing pedal
Drive lever
Dozer control lever
Right control lever
Left control lever
To unlock the hydraulic functions, lower the control console completely using the control lever lock.


Engine stop knob

The engine turns off when the starter switch (2) is switched to the
STOP position.
If the engine cannot be turned off, please operate the engine stop
knob switch in order to turn off the engine.
To stop the engine:
Pull the knob (1) until the engine stops.

After the engine has stopped, push in the knob.

26
KX027-4 KX027-4 HI
KX030-4 KX030-4 HI

 
 
 
 
 
Safety rules
1
2
RG268-8135-6
01/2019