Operating The Auxiliary Port - Kubota K008-3 Operating Instructions Manual

The figure details the swing movement.

Operating the auxiliary port

Implements are operated using the auxiliary port.
Only implements approved by KUBOTA may be used. The implements must be operated in
accordance with the operating instructions supplied with them.
With the use of a breaker or another attachment for demolition work, where material (e.g. as-
phalt) is removed and can uncontrollably sputter away, personal protective equipment is abso-
lutely to be worn (safety shoes, safety helmet, eye protection, ear protection and if necessary
facial mask).
For auxiliary port specifications, see the "Specifications" section (page 36).
The auxiliary port pedal may only be activated when an implement is attached.

Connect the implement according to the corresponding
operating instructions at the supply connection "P" (1) and
the return flow connection "T" (2).
If the auxiliary port has not been in use over a long
period of time, dirt may have accumulated on the
pipe connections of the supply connection "P" (1).
Before installing the implement, drain approx. 0.1 L
of hydraulic oil at the supply connection "P".
Catch the drained hydraulic oil in a container and
discard it in accordance with the valid environmen-
tal regulations.
80
Operation
W9212-8235-4
03/2019