Description Of The Components Of The Control Console - Kubota K008-3 Operating Instructions Manual

Description of the components of the control console

1. Left control lever
The functions of the left control lever are described in the "Controls" section (page 43).
2./3. Left and right drive levers
The functions of the left and right drive lever are described in the "Controls" section (page 43).
4. Right control lever
The functions of the right control lever are described in the "Controls" section (page 43).
5. Horn switch
Depressing the horn switch activates the horn.
6. Dozer control lever
The functions of the dozer control lever are described in the "Controls" section (page 43).
7. Starter switch
The starter switch serves as the master switch for the entire machine and as switch for pre-glowing and
starting the engine.
8. Boom swing pedal
This pedal is used to swing the boom right and left.
9. Displays and indicators
The functions of the displays and indicators are described in the "Displays and indicators" section
(page 43).
10. Fast drive position pedal (only for U 10-3)
Pressing the pedal activates the fast drive position.
11. Control lever lock
The operation of the control lever lock is described in the "Controls" section (page 43).
12. Auxiliary port pedal
The auxiliary port pedal is used to operate an implement.
13. Throttle lever
The engine speed can be infinitely adjusted from idle to maximum engine speed using the throttle lever. To
increase engine speed, pull back the throttle lever. To decrease engine speed, push forth the throttle lever.
42
Assembly and functions
W9212-8235-4
03/2019