Filling The Engine Oil - Kubota K008-3 Operating Instructions Manual

Filling the engine oil


Open the engine hood (page 89).

Unscrew the oil filler cap (1) and fill engine oil. See the
"Recommended lubricants" section (page 117).
Filling capacity: 2.2 L

Screw in the oil filler cap.

Start the engine. The engine oil pressure indicator should
disappear immediately after the engine has started; if not,
stop the engine immediately and contact trained personnel.

Let the engine run for approx. 4 minutes and then stop it.
Check the oil level after 5 minutes.

Pull out the oil dipstick (1) and wipe it with a clean cloth.

Insert the oil dipstick completely and pull it out again. The oil level should be in the "A" area. If the oil level
is too low, add engine oil.
When the oil level is too high or too low, the engine might get damaged during operation.

When changing the engine oil, fill engine oil up to the maximum of the "A" area.

Close the engine hood.
102
Maintenance
W9212-8235-4
03/2019