Safety Devices; Locking The Controls; Locking The Control Lever K008-5; Locking The Control Lever U10-5 - Kubota K008-5 Operating Instructions Manual

Safety rules

Safety devices

Before starting the machine, all safety devices must be installed properly and operational. Manipulating the safety
devices is prohibited.
Protective devices may only be removed once
the excavator is standing still and the engine is stopped

and secured against restarting (starter switch in STOP position and key removed).


Locking the controls

Locking the control lever K008-5

If the control lever lock (1) is located in the upper position, then the
hydraulic functions of the following controls will be locked:
Function
Drive lever
Right control lever
Left control lever
Make sure that all controls are in the neutral position
and that the control levers and the drive levers are
STOP
locked.
The hydraulic functions for setting the track width, op-
erating the dozer, swinging the boom and operating
STOP
the auxiliary port are not locked by the control lever
lock and can be activated.
To release the control lever, place the control lever lock into the lower position.


Locking the control lever U10-5

If the left or the right control console (2) is raised completely with the
control lever lock (1), then the hydraulic functions of the following
controls will be locked:
Function
Auxiliary port pedal
Boom swing pedal
Drive lever
Dozer control lever
Right control lever
Left control lever
To unlock the hydraulic functions, lower the control console

completely using the control lever lock.
W9215-8135-1
06/2021
K008-5



U10-5






1
2
1
1
29