Opening And Closing The Engine Hood; Replacing The Bucket - Kubota K008-3 Operating Instructions Manual

Operation

Opening and closing the engine hood


Pull lever (1) up and tilt the engine hood (2) backward. The
engine hood will stay in the open position because of the
mounting.

To close, pull up the lever (1) at the mounting (2), then flip
the engine hood forward until it snaps in.

Replacing the bucket

When replacing the bucket, make sure to wear an eye protection, a helmet and protective gloves.
During attaching and detaching, chippings and burrs may occur at the bolts or bushings. These
may cause severe injuries.
Never use your fingers for the alignment of the components (link, bucket, arm). The components
may sever your fingers by uncontrolled movements.
W9212-8235-4
03/2019
89