Safety rules
Danger, warning and safety labels on the machine
Care of danger, warning and safety labels
Keep danger, warning and safety labels clean and free from interfering objects.
Clean danger, warning and safety labels with soap and water and dry with a soft, clean cloth.
Replace damaged or missing danger, warning and safety labels with new ones from your KUBOTA dealer.
If a component with glued-on danger, warning and safety labels is replaced with a new part, make sure
that the new labels are affixed to the same location as the replaced component.
Danger, warning and safety labels should be stuck only on clean and dry surfaces. Press any air bubbles
into the outer edge of the sticker.
The positioning of the danger, warning and safety instructions is illustrated in the following figures.
W9212-8235-4
03/2019
15