Transport On A Flat Bed Trailer - Kubota K008-3 Operating Instructions Manual

Recovery, loading and transport

Transport on a flat bed trailer

Adhere to the safety rules (page 10) and the safety
rules for transport (page 28).

Place the loading ramps on the transport vehicle at an
angle of 10° to 15°. Observe the track width.

Bring the excavator exactly into line with the ramps and
drive up straight.
Do not turn or steer while driving up the ramps; if necessary, reverse the excavator and drive up
again after realigning it.
Danger to life!
No person is allowed to stand in the loading area during movement. Risk of crushing.
Take care during swivel operations, the front attachments could thrust against the transport
vehicle. This could damage the transport vehicle and the excavator.

Turn swivel frame by 180° until the front attachments face the rear of the transport vehicle.
For protecting the vehicle, use the points as shown in the figure.
W9212-8235-4
03/2019
31