Table of Contents
Advertisement
2.1 Software Versions
The WiMag systems uses a large number of system elements, many of which run
independent software. This section outlines the current software releases (at time of
publication).
Sensys Hardware
FlexAP (FLEX-AP-D-XC)
FlexControl
(FLEX-CTRl-M)
SPP
Access Point (AP240)
FlexNode
(FLEX-NODE-LPDC-XC)
Repeater (RP240-BH-LL)
Repeater (very old)
Sensor F-2 (New)
Sensor F (Old)
Bike Sensor (uR)
Siemens Hardware
Standard Interface Card
Detector Interface Card
XPORT(-04)
XPORT(-05)
Software
Traffic Dot
Note: All elements are backward compatable (e.g. obsolete sensor f/w will work
with newer repeater f/w).
Note: It is highly recommended that the latest Traffic Dot is used, in order to
ensure that all system elements are 'visable' to the user.
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Current F/W Release Notes
3.0.10.18
3.0.10.18
40
1.8.16
115.4.7
115.2.7
110.1.7
131.5.3
127.3.3
165.6.14
Current F/W Release
3.0
2.0
1.0
2.0
Release
2.14.7
Page 16 of 117
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
Backwards
compatible
AP240
Radio
to
be
used
FlexControl
Obsolete from October 2018
Line Powered Repeater
LL – Long Life Battery Repeater
H/w obsolete from March 2016
H/w obsolete from Jan. 2016
Please note 153.6.14 is not
recommended by Siemens
H/w obsolete from June 2014
May report as 4.5.0.28
See Sensys Website for latest
version
Status
Issued
Date
March 2020
Doc. No.
667/HB/47200/000
BH17 7ER
with
with
Advertisement
Table of Contents
