Table of Contents
Advertisement
3.5 RP240-BH Flex-Node
An alternative repeater, Flex-Node, can also be used to extend the distance a
magnetometer can be installed from an access point. As many as two repeaters operating
in tandem can be installed between a sensor and access point, thereby increasing the
distance further.
The flex-node uses an external PSU and therefore mitigates for battery maintenance.
Siemens Part Number
Manf. Part Number
Power Supply
Dimensions
Weight
Environmental
Operating Temp.
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Figure 9 : Flex-Node
640/4/90040/000 – FlexNode
640/4/90042/000 – Antenna
FLEX-NODE-LPDC-E-XC
FLEX-ANT-OMNI
• 9-24VDC
24.13 cm x 14.19 cm x 10.97 cm
• 0.6 kg
• mounting kit; add'l 0.5 kg
• designed for weatherproof, outdoor operation
• IP67 ingress protection
-40ºC to +80ºC
Figure 10 : Flex-Node Specifications
Page 22 of 117
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
Status
Issued
Date
March 2020
Doc. No.
667/HB/47200/000
BH17 7ER
Advertisement
Table of Contents
