3.4 RP240-BH Repeater
The repeater can be used to extend the distance a magnetometer can be installed from
an access point. As many as two repeaters operating in tandem can be installed between
a sensor and access point, thereby increasing the distance further. To simplify
deployment, repeaters are battery-powered.
Siemens Part Number
Power Supply
Recommended Battery
Replacement
Dimensions
Weight
Environmental
Operating Temp.
1
Full data sheet may be found on the Sensys website :
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Figure 7 : Repeater
640/4/90029/000 – Long Life Variant
• non-replaceable primary Li-SOCl2 3.6V battery pack
Unit replacement expected after eight years of
operation.
13.4 cm x 10.6 cm x 13.5 cm
• 0.8 kg
• mounting kit; add'l 0.5 kg
• designed for weatherproof, outdoor operation
• IP68 ingress protection
-25ºC to +85ºC
Figure 8 : Repeater Specifications
http://www.sensysnetworks.com/
Page 21 of 117
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
1
Status
Issued
Date
March 2020
Doc. No.
667/HB/47200/000
BH17 7ER