Table of Contents
Advertisement
11 Installation of the Repeater and FlexNode
This section deals with the mounting of the repeater units. The repeater uses a similar
ball and socket fixing mechanism as per the access point.
One of two mounting kits have been made available. The first is designed for signal head
mounting (667/1/47230/000) (same as that used for mounting Access Points). The second
is a pole mounting banding kit (667/1/47235/000), which will be used for attachment to
existing poles such a lighting columns. The later is typically used with repeaters.
11.1 Pole Mounting Banding Kit
Repeaters, where possible, are to be affixed to street lighting columns as this gives an
extended range of options for mounting height without the need for specialist mounting
equipment. A simple clamping band is used to attach a square plate bracket to the pole
and the double socket arm then mounts the repeater to the bracket.
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Figure 48 : Square Plate and Clamping Band
Page 65 of 117
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
Status
Issued
Date
March 2020
Doc. No.
667/HB/47200/000
BH17 7ER
Advertisement
Table of Contents
