Table of Contents
Advertisement
17.2.7 Sensor Replacement
The WiMag magnetometer sensor is not designed for replacement. If the battery has
reached its end of life, the most appropriate method for replacement is the re-installation
of a second sensor in a nearby location.
Full details of sensor installation can be found in the appropriate documentation;
Sensys Part Number
667/CC/47200/000
17.3 Second Line Maintenance
It is recommended that undamaged parts are reused where possible.
All other parts must be sent for repair or disposal, details of which, are held in the 'Global
Service Support Plan (ref. 667/PA/47200/000) and in the sections below.
NOTE: Observe Anti Static Precautions at all times.
Faulty parts being returned must always be sent back in the original packaging if available
or in an approved anti-static packaging, along with a fully completed fault label, to;
Any queries should be directed to the Service Logistics Manager on (01530) 258181
Version
11
Last Editor
Jeerh, Manpreet
Document
WIMAG GENERAL HANDBOOK
Name
Copyright © Siemens Mobility Limited 2012. All Rights Reserved.
Table 20 : The installation of a WiMag Detector
Logistics Spares Returns Centre
Siemens Mobility,
Traffic Solutions,
Coalfield Way,
Ashby Park,
Ashby de la Zouch,
LE65 1JD
Page 96 of 117
Document Description
The Installation of a WiMag Detector
Status
Date
Doc. No.
Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Issued
March 2020
667/HB/47200/000
Advertisement
Table of Contents
