Chapter 3 Osd Menu; Start; Transition Type; Transition Speed - Datavideo 4K ShowCast STUDIO Instruction Manual

Chapter 3
The switcher's OSD menu allows the user to perform several configurations of video effects, such as
picture-in-picture, luma key, etc. The user can also configure the audio settings in the Audio sub menu.
The setup sub menu allows the user to set video output resolution, reset to factory default, and select
the interface language.

3.1 Start

Main Sub-Menu

Transition Type

Transition Speed

WIPE Effect
WIPE Border Size
Start
WIPE Border Color
BKG Color
WIPE Rev.
Transition Type
The ShowCast-100 provides two types of transition effect, which are cross dissolve (MIX) and WIPE. The
default setting is MIX.
Transition Speed
The Transition Speed allows the user to set the MIX or WIPE effect duration, in frames. If the Transition
Speed is set to a value of 60 then the transition will take effect over a period of 1 second if the
OSD Menu
Options or Values
MIX
WIPE
1-200 frames
Left Right
Top Bottom
Center
OFF
Small
Middle
Large
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
Normal
Rev
Default Value
Mix
60 frames; the duration in
second depends on the Program
OUT resolution.
Left Right
Small
Red
White
Normal
27