Datavideo 4K ShowCast STUDIO Instruction Manual page 51

6. Double click the NVS-31 MARK IV's IP address, and your browser should open up with a login
screen shown below. You can also manually enter the device IP address into the address bar of a
browser on your laptop then hit the ENTER button.
7. Enter the login credentials (Username: admin/Password: 000000) to log in to the web UI shown
below.
Brief descriptions of the tabs are provided as follows:
Source: View and configure various video sources.
Operation Mode:
- Record: Configure the two built-in recorders.
- Streaming: Configure the two built-in stream servers.
CG: Create textual or graphic layers (Text, News, Graphic,
Monitor: Set the HDMI output frame rate and volume of the embedded audio.
System: System settings include
disk formatting, device
Note: In Networking Setting, you will be allowed to enable/disable DHCP; see the following sections
for details on connecting in the respective modes.
network setting,
name, timeout duration,
Logo and Animation) on the videos.
login credentials, time
reset and reboot.
51
setting, firmware update,