Table of Contents
Advertisement
Stream Mode
The NVS-31 MARK IV has two stream engines allowing you to stream to two different destinations
over multiple protocols. The configurable stream settings are Encoder Source, Stream Type,
Resolution, Frame Rate, Profile, Entropy, GOP, Encoder Mode, Video Bitrate (bps) and Audio Bitrate
(bps) which will be described later in this section.
Seven streaming protocols available on the NVS-31 MARK IV are RTSP, RTMP, TS, HLS, SRT,
KUAISHOU and DV Cloud.
See
Section 6.3
for instructions on each individual stream setup.
Note that once your video streams are set up, click "Apply" button to apply the new stream settings.
Click "Start Stream" to open the stream and "Stop Stream" to end the stream. To reset, simply click
the default button.
Next, we will discuss the stream setting options in greater detail.
Encoder Source
This option allows you to enable the stream encoder for configurations of various parameters. If the
stream encoder is not needed, disable this option.
57
Advertisement
Table of Contents
Troubleshooting
