Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Datavideo AD-100
Summary of Contents for Datavideo AD-100
- Page 1 Audio Delay Box AD-100 Instruction Manual Rev 171209 www.datavideo-tek.com...
-
Page 2: Table Of Contents
Introduction ......................... 4 Features ........................4 Connections & Controls ....................5 Front Panel ........................5 Rear Panel ........................6 AD-100 MENU Settings ....................7 1. AUDIO_DELAY ....................7 2. DELAY_TIME ....................... 7 3. ATTENUATION ....................7 4. TONE_OUT ......................8 5. -
Page 3: Warnings And Precautions
BEFORE connecting any output connections on the AD-100 rear panel. The AD-100 is an Audio Delay device and it can also be used as a Tone Generator. Please DO NOT connect the AD-100 directly to a headset or a set of speakers - it should not be used like an Audio AMP. -
Page 4: Warranty
Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only covered for the first 10000 hours, or 1 year (whichever comes first) Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires. Disposal For EU Customers only - WEEE Marking This symbol on the product indicates that it should not be treated as household waste. -
Page 5: Introduction
The Datavideo AD-100 is an easy to use Audio Delay box that enables you to synchronize video and audio. The AD-100 can also be used as a 1KHz Tone Generator. The unit features traditional RCA (phone) connectors as well as Professional Balanced XLR type connections. -
Page 6: Connections & Controls
Connections & Controls Front Panel Power Switch Switches the power On / Off. MENU This switch allows access to the 9 mode system settings. MODE Select LEVEL or TIME information on LCD Display. LEVEL will display the audio output dBu level. TIME will display the AUDIO DELAY &... -
Page 7: Rear Panel
Rear Panel AUDIO OUT 2 channels XLR balanced audio output. 2 channels RCA unbalanced audio output. For reference : 4dBu (XLR) = -10dBV (RCA) AUDIO IN 2 channels XLR balanced audio input. 2 channels RCA unbalanced audio input. DC In Socket Connect the supplied 12V / 1.5A (18W) PSU to this socket. -
Page 8: Ad-100 Menu Settings
This setting adjusts how loud or quiet the audio will be at the output. 0dB=Loud and -60dB=Quiet. NB: The AD-100 is an Audio Delay device and it can also be used as a Tone Generator. Please DO NOT connect the AD-100 directly to a headset or set of speakers it should not be used like an Audio AMP. -
Page 9: Tone_Out
- Rotate the ADJUST knob to choose another menu option or press the mode button. N.B. The test tone will be output at the level set within the TONE_LEVEL menu option. This test tone will also override any audio source already being fed through the AD-100. 5. TONE_MODE This setting allows the 1KHz test tone to be switched on or muted. -
Page 10: Reset All
AD-100 rear panel. NB: The AD-100 is an Audio Delay device and it can also be used as a Tone Generator. Please DO NOT connect the AD-100 directly to a headset or set of speakers it should not be used like an Audio AMP. -
Page 11: Example Set Up
Example Set Up Specification • 2 x balanced stereo audio, XLR connectors Audio inputs • 2 x unbalanced stereo audio, RCA / Phone sockets • 2 x balanced stereo audio, XLR connectors Audio Output • 2 x unbalanced stereo audio, RCA / Phone sockets •... -
Page 12: Service & Support
It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below.