Datavideo 4K ShowCast STUDIO Instruction Manual page 79

Follow the steps below to obtain the TS URL:
1. On the web UI, click "Operation Mode"  "Stream" to open the stream settings page.
2. Select TS from Stream Type drop-down menu.
3. Enter the TS URL. Note that the TS URL shown below is only for illustration purpose.
4. Click the Start Stream button to start the stream.
5. Enter the TS play URL into the client device to which the video stream is delivered over TS
protocol.
6. On the computer, open VLC then click Open Network Stream (shown in the diagram below).
7. As shown in the diagram below, enter the stream URL then click Play to start streaming.
79