Position X; Position Y; Split Source; Border Size - Datavideo 4K ShowCast STUDIO Instruction Manual

Position X

Adjusting Position X moves the PIP window horizontally. Decrementing Position X moves the PIP
window left and incrementing Position X moves the PIP window right.

Position Y

Adjusting Position Y moves the PIP window vertically. Decrementing Position Y moves the PIP window
down and incrementing Position Y moves the PIP window up.

Split Source

The Split mode, once enabled, splits the PROGRAM output display into two windows with
source shown on the left and the PIP source shown on the
view, can be selected from the list below:
 Black
 Input 1
 Input 2
 Input 3
 Input 4
 Background
 Color Bar

Border Size

The Border Size generally allows the user to select an appropriate PIP border width. Setting the Border
Size to OFF turns the PIP border off. Setting the border size to small selects a thin border; middle will
yield a medium size width; large is the maximum PIP border width.

Border Color

The user is allowed to assign a PIP border color. The available colors are listed as follows:
 White
 Yellow
 Cyan
 Green
 Magenta
 Red
 Blue
 Black

PIP/Split Mode

Selecting PIP places a sub window on the PGM or PVW screen. The Split mode, once enabled, splits the
PROGRAM output display into two windows with the program out view on the left and the PIP view on
the right.

PGM

Turning ON PGM places the PIP window on the PGM screen.

PVW

Turning ON PVW places the PIP window on the PVW screen.
right. The Split source, i.e. the program out
30
the split