Animation - Datavideo 4K ShowCast STUDIO Instruction Manual

After the logo file has been successfully uploaded, you can adjust the size by entering appropriate
values in the Width and Height fields.
The Effect drop-down list sets how the logo enters the video. Select "Cut in" if you want the logo to
appear with no effect. If you want the logo to enter from either side of the screen, select "Left to
Right" or "Right to Left".
Lastly, set the coordinates of the logo. The position of the logo on the screen will be shown in the
location box and previewed on the Monitor connected to the CG-Preview port or HDMI OUT 4.
To enable the logo, simply click the ON button which can be found at the bottom of the page.

Animation

You can also add an animation to the video. You will be required to select a jpg, jpeg, bmp, png or gif
file from your local hard disk. Click Select to browse the hard drive for your animation file then click
Update to start the upload.
After the animation file has been successfully uploaded, you can adjust the size by entering
appropriate values in the Width and Height fields.
The Effect drop-down list sets how the animation enters the video. Select "Cut in" if you want the
animation to appear with no effect. If you want the animation to enter from either side of the screen,
select "Left to Right" or "Right to Left".
70