Ceiling Mounting - Vinten FHR-35 User Manual

Ceiling Mounting

The FHR-35 can be mounted to the ceiling using either a
column mount (part no. 196-728-0044) or a bracket (part no.
AM-CEIL-102). When mounting the head to a ceiling support,
the camera cradle must be inverted.
1.
Refit the camera cradle to the tilt
mounting in an inverted orientation.
Using a 4 mm Allen key, secure in
position using the two screws and
washers.
FHR-35 Robotic Pan and Tilt Head FHR-35 Robotic Pan and Tilt Head
2.
Mount the head to the ceiling bracket or column.
Radamec Adaptor Column
(196-728-0044)
Using a 5 mm Allen key, attach
the head to the column mounting
using the four M6 cap head
screws and washers provided.
Installation
Ceiling Mounting Bracket
(AM-CEIL-102)
Using a 5/16" Allen key,
attach the head to the ceiling
mounting bracket using the
six 10-32 cap head screws
and washers provided.
11