Table of Contents
Advertisement
Contents
Charging
Valve
Pressure
Tank
Head Mounting Platform
19
The platform consists of a contoured alloy casting attached to the upper stage of the telescopic column.
On the top of the platform provision is made for mounting a pan and tilt head (2). On the underside of the
platform there are six eccentric shafts carrying nylon rollers which locate the steering ring around the column.
The steering mechanism upper section is also fitted to the underside of the head mounting platform as are the
brackets and spigots of the locking bar assembly together with the rubber stops.
Pneumatic System
20
The pneumatic system
Schrader-type charging valve and pressure gauge are connected to the top face of the pressure tank by a
banjo assembly. A safety valve is screwed into a boss in the side of the tank.
Pressure
Gauge
Fig 1.2 Pneumatic system - schematic diagram
(Fig 1.2)
consists of the pressure tank, the manifold and the two-stage ram. A
First
Previous
Next
Page
Page
Page
Two-stage
Ram
Safety
Valve
Previous
View
18
Advertisement
Table of Contents
