Cable Management Brackets; Removing The Camera Cradle - Vinten FHR-35 User Manual

Cable Management Brackets

The FHR-35 is supplied with a cable management bracket fitted
to the base. Camera and head connecting cables can be neatly
secured to the bracket providing strain relief for the connectors.
Depending on the camera and head setup, the larger cable
management bracket can be fitted.
V4096-2075
Supplied fitted
to the head
FHR-35 Robotic Pan and Tilt Head FHR-35 Robotic Pan and Tilt Head

Removing the Camera Cradle

The first step in installing the head is to set the mechanical
hard stops to limit the movement of the head about the pan and
tilt axes. To set these limits, the camera cradle must be
removed.
1.
Using a 4 mm Allen
key, remove the two
screws and washers
securing the camera
cradle.
V4096-2082
Installation
2.
Pull the camera
cradle away from
the tilt mounting
plate.
7