3. To install the new
GelMat, remove the
protective liners from the
adhesive strips on the
back of the GelMat.
4. To position the GelMat
for adhesion, it is
recommended to hold the
shorter edges with your
fingers and place the
GelMat down with its
center hanging, creating a
U-shape.
Once the position is
finalized, gently place the
GelMat onto the Light
Bed.
5. Ensure the position of the
GelMat is in the center of
the Light Bed using the
blue lines as indicators.
6. Ensure that the GelMat's
Q.R. code label does not
overlap any of the
existing warning labels on
the Light Bed.
© 2022 by NeoLight LLC.
All rights reserved.
Page 25 of 43
500050 Rev A