NeoLight Skylife Service Manual page 19

2. Unpack the device and place it on an uncluttered and non-abrasive surface or inside a four-walled
enclosure for treatment
3. Connect the Controller and
Light bed Power and Data
Cable.
a: Light Bed Cable
b: Ensure the Arrow is
facing up when connecting
IMPORTANT!
When disconnecting, pull
the sleeve to properly
disconnect the cable from
the port to avoid damaging
the connection lock.
a: Sleeve
IMPORTANT!
Disconnect the Controller
from the Light Bed only
when the device has to be
packaged for shipment.
© 2022 by NeoLight LLC.
All rights reserved.
b
a
a
Page 19 of 43
500050 Rev A