On Consignment Of The Machine; Introductory Comment - Fimap FS80 Use And Maintenance Manual

ON CONSIGNMENT OF THE MACHINE

When the machine is delivered to the customer, an immediate
check must be performed to ensure all the material mentioned
in the shipping documents has been received, and also to check
the machine has not been damaged during transportation. If
this is the case, the carrier must ascertain the extent of the
damage at once, informing our customer service office. It is
only by prompt action of this type that the missing material can
be obtained, and any compensation for damage successfully
claimed.

INTRODUCTORY COMMENT

Even the best machines will only work well if used correctly
and kept in good working order. We therefore suggest you read
this instruction booklet carefully and read it again whenever
difficulties arise while using the machine. If you need it,
remember that our technical assistance centre, organised in
collaboration with our dealers, is always at your disposal for
any possible recommendation or direct intervention
CAUTION
The manual of the endothermic engine is integral part of this
manual. This manual is supplied as annex.
Other manuals are also available at the assistance network:
- the spare parts manual,
- the Adjustments and Testing document,
- the electrical diagram,
- the hydraulic diagram.
When asking for spare parts, always quote the product code
(MAT. COD.) and serial number (No ...) of the machine indicated
in the serial number plate attached to the frame.
For the engine, refer to the plate applied on it by the
manufacturer.
SERIAL NUMBER PLATE
6