Choosing And Using The Brushes 1. Polypropylene (Ppl) Brush; Bristle Thickness; Central Brush Table; Side Brush Table - Fimap FS80 Use And Maintenance Manual

1. POLYPROPYLENE BRUSH (PPL)
It is used on every type of floors and has good resistance
to wear. PPL is non-hygroscopic and therefore retains its
characteristics even when working in wet conditions.

CENTRAL BRUSH TABLE

MACHINE CODE
429189
80 429200
429021
429202
90 429203
429204
431115
110 431117
431116
424902
100 424904
424906
424903
120 424905
424907
Replace the central brush when the bristle height is 15-20 mm.
BATTERY CONTAINER DIMENSIONS (mm)
Machine A B
80 B 595 295
90 B 620 420
110 B 620 420
100 B 800 420
120 B 800 420
CHOOSING AND USING THE BRUSHES
TYPE OF
DIMENSIONS
BRISTLES
PPL 1,1+0,7 800x320
PPL 0,7 800x320
PPL 1,4 800x320
PPL 1,1+0,7 900x320
PPL 0,7 900x320
PPL 1,4 900x320
PPL 1,1+0,7 1100x320
PPL 0,7 1100x320
PPL 1,4 1100x320
PPL 1,1 1000x320
PPL 0,7 1000x320
PPL 1,4 1000x320
PPL 1,1 1200x320
PPL 0,7 1200x320
PPL 1,4 1200x320

BATTERY CONTAINER DIMENSION

C D E
515 80 80
500 120 210
500 120 210
640 160 210
640 160 210

2. BRISTLE THICKNESS

The thicker bristles are more rigid and should therefore be used
on surfaces with solid or heavy dirt (e.g. gravel, drinks cans,
etc.).
Softer bristles are recommended for surfaces with light dirt or
dust.
Remember that when the bristles are worn, and therefore too
short, they become rigid and cannot pick up the dirt efficiently.
Central brush has bristles of 1.1mm and of 0.7mm to comply
with both characteristics.

SIDE BRUSH TABLE

MACHINE CODE
429205
80 - 90 - 100
429206
411695
100 - 120
424909
Capacity
F Height
Ah/C5
215 450 320
210 450 480
210 450 480
210 460 640
210 460 640
26
TYPE OF
DIMENSIONS
BRISTLES
PPL 1,1
Ø450
ACC. 0,7
PPL 1,0 Ø450
PPL 1,1
Ø500
ACC. 0,7
PPL 1,5 Ø500