Preparation Of Machine; Handling The Unpacked Machine - Fimap FS80 Use And Maintenance Manual

Table of Contents

Advertisement

1. HANDLING THE MACHINE WITHOUT PACKAGING
To move the machine, without batteries or engine off, proceed
as follows, operating on a perfect flat surface.
1 Activate the parking brake by pressing the pedal as shown in
the figure (A).
2 Open the trunk by means of the command (1), rotating it (80-
90-110) or pressing it (100-120), then raising it and blocking
with the rod.
3 Undo the valve (2) installed on the traction pump taking it to
the stop position so as to move the machine (100-120).
Turn the lever (80-90-110) located between the 2 output
pipes by 90°.
4 Disengage the parking brake by pushing the lever forwards,
as shown in the figure (B).
After moving the machine, restore the former conditions so it
can be used.
ATTENTION: the sweeping machines must only be
activated by suitably trained and authorised operators,
and only after they have ensured that the machine
itself is in good working condition.

PREPARATION OF MACHINE

80-90-110-100-120 B-D-Bifuel
80-90-110 B-D
80-90-110 B
80-90-110 D
15
A
1
2
2
B
80-90-110-100-120 B-D-Bifuel
1
100-120 B-D-Bifuel
2
100-120 B
2
100-120 D-Bifuel

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FS80 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Fs90Fs110Fs100Fs120

Table of Contents