On Consignment Of The Machine; Introductory Comment; Intended Use; Serial Number Plate - Fimap MY50 Use And Maintenance Manual

ON CONSIGNMENT OF THE MACHINE

SERIAL NUMBER PLATE

When the machine is consigned to the customer, an immediate check
must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
suffered damage during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing our
customer service office. It is only by prompt action of this type that the
missing material can be obtained, and compensation for damage
successfully claimed.

INTRODUCTORY COMMENT

My50 is a scrubbing machine that is able to clean a wide variety of
flooring and dirt types by using the mechanical action of at least one disk
or cylindrical brushes (depending on the model), and the chemical action
of a water-detergent solution. As it advances, it also collects the dirt
removed and the detergent solution not absorbed by the floor.
The machine must only be used for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore recommend you read this instruction booklet
carefully, and consult it whenever difficulties arise while using the
machine. If necessary, remember that our customer assistance service
(organised in collaboration with our dealers) is always available for
advice or direct intervention.

INTENDED USE

The floor scrubbing machine is designed for the professional cleaning of
surfaces and floors in industrial, commercial and public environments
only. It is only suitable for use in closed (or at least covered) places. The
machine is not suitable for use in the rain, or under water jets. IT IS
FORBIDDEN to use the machine for picking up dangerous dusts or
inflammable liquids in places with an explosive atmosphere. In addition,
it is not suitable as a means of transport for people or objects.
5