Management Port/Multiplexing Port Ip - Inspur NF8480M5 Operation And Maintenance Manual

The BMC management port IP address, if static, the customer should remember; If it is
dynamic, IP can be assigned. So as to perform BMC login and relevant information check,
etc.
Operating steps
1 、 IP is dynamic. Connect the notebook computer with the server management port
directly, and an IP address will be assigned to the server management port at this time.
You can check the current IP of the management port by restarting self-checking or
entering BIOS. BIOS check BMC's IP address interface as shown in Figure 8-3. If
the server cannot be restarted, you can call Inspur No Hotline for support.
2. IP is static, first confirm whether notebook IP and management port IP are on the same
network segment, otherwise change to the same network segment. Ensure that the
notebook computer can ping with the server.
Inspur proprietary and confidential information
Copyright Inspur Electronic Information Industry Co., Ltd.
7.2

Management port/multIPlexing port ip

Figure 8- 3
NF8480M5
Operation and
Maintenance Guide
23