Figure 3-33 Selecting Create Virtual Drive
3.
Select Select RAID Level by pressing <↑> or <↓> and press <Enter>.
Select RAID6 from the list and press <Enter>.
4.
5.
Locate Select Drives by pressing <↑> or <↓> and press <Enter> to add member
drivers.
Figure 3-34 Selecting Select Drives
6.
On the popup screen, configure as follows:
a. Set Select Media Type to Both.
b. Select the drives for RAID array creation in sequence and set the drive
status to Enabled. Note: Three drives are selected, as shown below.
41