Table of Contents
Advertisement
Figure 3-24 Selecting Create Virtual Drive
3.
Select Select RAID Level by pressing <↑> or <↓> and press <Enter>.
Select RAID5 from the list and press <Enter>.
4.
5.
Locate Select Drives by pressing <↑> or <↓> and press <Enter> to add member
drivers.
Figure 3-25 Selecting Drives
6.
On the popup screen, configure as follows:
a. Set Select Media Type to Both.
b. Select the drives for RAID array creation in sequence and set the drive
status to Enabled. Note: Three drives are selected, as shown below.
34
Hide quick links:
Advertisement
Table of Contents
