Introduction; About Inspur Sas3408It - Inspur 3408 Series Configuration Manual

2

Introduction

This chapter describes the appearance, features, and functions of Inspur 12 G SAS
RAID controller cards. For information about 9440/9460 series, refer to the
datasheet on Broadcom website.
2.1

About Inspur SAS3408IT

Inspur SAS3408IT SAS controller card is a cost-effective SAS solution designed
specifically to provide external drive storage and JBOD expansion capabilities for
servers. Refer to the figure below for its appearance.
Figure 2-1 SAS3408IT SAS Controller Card
Inspur SAS3408IT SAS controller card uses the SAS3408 IO controller from
Broadcom, with OCP 2.0 and PCIe 3.0 x8 interfaces and a powerful I/O storage
engine. It can transparently execute all data verification and recovery tasks.
Inspur SAS3408IT SAS controller card supports:
None of the RAID levels

PCIe 3.0 x8 interfaces to deliver a bandwidth rate up to 8 Gbit/s

Eight SAS/SATA ports for drive storage

Two directly connected PCIe x4 NVMe drives

Connection to a maximum of 24 SAS/SATA drives or 24 NVMe drives

Hot-swap drives

9