This section describes the features of the projector, and explains the functions of the projector and
remote controller keys.
Projector Features and Main Functions
Mercury-free Hybrid Light Source:
A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 4000
lumens. This projector does not use a mercury lamp, making it environmentally friendly.
A wide selection of input sources:
Analog RGB, composite video, S-video, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input
sources are supported.
Intelligent Brightness Control function (Eco Mode):
The projector senses surrounding light levels and adjusts projection brightness automatically as
required for efficient low-power operation. (Requires "Eco Mode" setting to be set to "On (Auto)".)
3D image projection support:
Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input
sources (analog RGB, composite video, S-video) is supported.
* Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in
3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D
image with the projector when a computer (analog RGB) is the input source.
The remote controller can be used to select one of a variety of different pointers for use during
Direct Power On:
The projector can be configured to turn on automatically and start projecting as soon as it is
plugged into a power outlet.