Download Table of Contents Print this page

Casio XJ-H1600 User Manual page 42

Data projector
Hide thumbs Also See for XJ-H1600:

Advertisement

Table of Contents
Indicator/Error Message
POWER
: Green steady
LIGHT
: –
TEMP
: –
Message : A system problem has
occurred. Normal
projection is not possible.
POWER
: Green steady
LIGHT
: –
TEMP
: –
Message : There is some problem
with the system.
The audio function may
not operate correctly.
POWER
: Green steady
LIGHT
: –
TEMP
: –
Message : Some problem occurred
with the USB port or LAN
terminal.
POWER
: Amber flashing
Red steady
LIGHT
: –
TEMP
: Red steady
Message : –
POWER
: Amber flashing
Red steady
LIGHT
: Red flashing
(0.5-second interval)
TEMP
: Red flashing
(0.5-second interval)
Message : –
POWER
: Amber flashing
Red steady
LIGHT
: Not lit or red flashing
TEMP
: Red flashing
(2-second interval)
Message : –
Description and Required Action
A system problem has occurred, which may cause problems with some
functions. Turn off the projector, disconnect the power cord from the
projector and wait for all of the projector's indicators to go out. Next,
reconnect the power cord and turn the projector back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.
The USB or LAN connection was terminated because of a problem with
the USB port or LAN port. To use the USB or LAN function, turn off the
projector and then turn it back on again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Press the [ESC] key to clear the warning message.
The projector was turned off automatically due to some problem that was
probably caused by external digital noise or some other reason. Confirm
that the POWER/STANDBY indicator is lit red (without flashing). After
checking the POWER/STANDBY indicator, disconnect the power cord
from the projector and wait for all of the projector's indicators to go out.
Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
The projector was turned off automatically because the light source unit
turned off or did not turn on. After confirming that the POWER/STANDBY
indicator is lit red (without flashing), unplug the power cord. Wait for a
short while and then plug it back in and turn on the projector again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
Power has turned off automatically due to a projector memory error.
Confirm that the POWER/STANDBY indicator is lit red (without flashing).
After checking the POWER/STANDBY indicator, disconnect the power
cord from the projector and wait for all of the projector's indicators to go
out. Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
42

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Casio XJ-H1600

This manual is also suitable for:

Xj-h1650Xj-st145Xj-st155Xj-h1700Xj-h1750

Table of Contents