Screen Settings Main Menu - Casio XJ-H1600 User Manual

Screen Settings Main Menu

Setting Name Input
Keystone R C V H D U N Single
Correction
Aspect Ratio R C V H D
Projection R C V H D U N Single
Mode
Ceiling Mount R C V H D U N Single
Setting Unit
Use this sub-menu to correct vertical keystoning of the projected
image.
Source Use this sub-menu to select an aspect ratio setting for the projected
image.
Specific
Input Source: RGB or HDMI (PC)
Normal*:
Projects at the projector's maximum possible size while
maintaining the input signal aspect ratio.
Full:
Projects at the projector's maximum possible size by enlarging or
reducing the input signal.
Input Source: Video, S-video, Component or
HDMI (DTV)
Normal*:
Projects at the projector's maximum possible size while
maintaining the input signal aspect ratio.
16:9 :
This setting specifies a 16:9 aspect ratio, which is the same as a
movie screen, high-definition TV, etc. Using this setting when the
input signal is a 16:9 image that has been squeezed to a 4:3
image causes the image to be displayed with its normal 16:9
aspect ratio.
Note
When the input source is a component or an HDMI (DTV)
signal with an aspect ratio of 16:9, the aspect ratio is fixed
at 16:9. The aspect ratio setting cannot be changed in this
case.
For details about projection screen display conditions for
different aspect ratio settings, see "Aspect Ratio Setting
and Projection Image" (page 50).
Important!
Note that enlarging or reducing the size of an image for
commercial purposes or public presentation may infringe on
the legally protected copyright of the copyright holder of the
original material.
Use this sub-menu to specify whether projection will be from the
front of the screen or the back of the screen.
Front*:
Select this option to project from the front of the screen.
Rear:
Select this option to project from the back of the screen. This
setting flips the front projected image horizontally.
Use this sub-menu to configure the projector for use in an
installation in which it is positioned upside down.
On:
Flips the projected image horizontally and vertically.
Off*:
Projects a normal image.
32
Description