Displaying A Pointer In The Projected Image - Casio XJ-H1600 User Manual

Data projector
Hide thumbs

Advertisement

Table of Contents

Displaying a Pointer in the Projected Image

You can select from among different pointer styles, including various arrow styles, for display in the
projected image. Pointers can be used during a presentation to indicate or highlight a specific part of
the image.
Note
Depending on the pointer style you are using, the pointer may not display properly when you are
using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to
change the keystone correction value to zero.
To display a pointer in the image
1.
Press the [POINTER] key.
This will cause a pointer to appear in the image.
You also can use the setup menu to specify the pointer type that appears first when you press
the [POINTER] key. For details, see "Pointer" under "Option Settings 2 Main Menu" on
page 36.
2.
Use the cursor keys to move the pointer to the location you want.
Holding down a cursor key moves the cursor at high speed.
3.
To modify the pointer as described below, press the [STYLE] key.
For this pointer type:
To select the pointer type
1.
Press the [POINTER] key to display the pointer.
2.
Keep pressing the [POINTER] key until the pointer you want is displayed.
Each press of the [POINTER] key cycles through the available pointer types.
To clear the pointer from the image
Press the [ESC] key.
Pressing [STYLE] will change it like this:
Toggle between flashing and not flashing
16

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Casio XJ-H1600

  Related Manuals for Casio XJ-H1600

This manual is also suitable for:

Xj-h1650Xj-st145Xj-st155Xj-h1700Xj-h1750

Table of Contents