DATA PROJECTOR DATA PROJECTOR XJ-H1600/XJ-H1650 XJ-H1600/XJ-H1650 XJ-H1700/XJ-H1750 XJ-H1700/XJ-H1750 XJ-ST145 /XJ-ST155 XJ-ST145 /XJ-ST155 * USB port models * Modèles à port USB * Modelos con puerto USB • Some models covered by this User’s Guide may not be available in certain geographic areas.
Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference. About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage.
CASIO. Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO service center.
● Disposal by burning Never try to dispose of the projector by burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury. ● Looking into the lens or vents while light source unit is on Never look directly into the lens or vents while light source unit is on.
Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO service center. Never allow the remote controller to become wet. Water creates the risk of fire and electric shock.
Allowing dust to build up inside the projector for long periods without cleaning creates the risk of fire and breakdown. Contact your original dealer or authorized CASIO service center once a year about having the interior of the projector cleaned. Note that you will be charged for cleaning.
Safety Precautions 3D Glasses Warning 3D images should not be viewed by the types of individuals described below. Doing so creates the risk of loss of health. • Individuals with heart disease • Individuals with a history of photodermatosis • Individuals with epileptic tendencies Caution Do not view 3D images if you are experiencing any of the symptoms...
The failure of the light source unit to light or a noticeable drop in light source unit brightness indicates the end of the light source unit’s life. Contact your original dealer or authorized CASIO service center for replacement. Note that problems caused by unauthorized projector disassembly or modification are not covered by the warranty and are not eligible for repair by CASIO.
Operating Precautions Other Precautions This projector is made of precision components. Failure to observe the following precautions can result in inability to correctly save data and malfunction. ● Never use or store the projector in the following locations. Doing so creates the risk of malfunction of and damage to the projector.
● Keystone Correction and Image Quality Performing keystone correction causes the image to be compressed before it is projected. This can result distortion of the image or a loss of image quality. If this happens, change orientation of the projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the Projector”...
Unpacking As you unpack the projector, check to make sure that all of the items listed below are present. DATA PROJECTOR Remote Controller Mini D-Sub Cable (YT-120) • Test Batteries (AAA-size × 2) • AC Power Cord • Carrying Bag •...
Best results can be obtained when the projector is pointed directly at the screen, and not at an angle. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750 Screen The projector can be configured for projection from the back of a screen. For details, see the User’s Guide on the CD-ROM that comes with the projector.
Setup Precautions Use a conveniently located power outlet that you can reach easily when you need to unplug the projector. Do not allow any objects to be within the area indicated by the dashed line below, which is an area within 30cm (11.8 inches) of the projector.
Getting Ready Make fine adjustments to the elevation angle of the projector by rotating the front foot. Make fine adjustments to the horizontal tile of the projector by rotating the rear feet Important! Important! Important! To retract the front foot, hold down the release button and slide the front foot back into the projector.
Turn on the computer that is connected to the projector. If the projector lens cover is covering the lens, remove it. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750: Insert your fingers into its recesses and squeeze towards the middle. XJ-ST145/XJ-ST155: The lens cover is held on by magnetic force, so simply pull to release it.
Contains detailed information about the projector. USB Function Guide Explains operations when connecting USB (USB port models memory, a CASIO Multi Projection Camera only) (YC-400, YC-430), or a graphic scientific calculator to the USB port on the back of the projector.
Indicators keep you informed about the current operational status of the projector. The following shows what the indicators look like when operation is normal. When the indicators appear like this: POWER/ You have just plugged the AC power cord into a power outlet. Wait until LIGHT TEMP STANDBY...
Check the following items whenever you experience any problem with the projector. Problem Power does not turn If the POWER/STANDBY indicator is not lit, the AC power cord is not connected correctly. Connect the AC power cord correctly. If the TEMP or LIGHT indicator remains flashing or lit, it means some type of error has occurred.
User’s Guide (UsersGuide_English.pdf). lit. The light source unit The light source unit has reached the end of its service life or it is does not light. malfunctioning. Contact your original dealer or authorized CASIO service center for replacement. Important! Important! Important! Try performing the following steps, which may or may not return the projector to normal operation.
Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits. Connector cable...XJ-H1600/H1650/H1700/H1750/ST145/ST155 unit to PC Model Number: XJ-H1600/H1650/H1700/H1750/ST145/ST155 Trade Name: CASIO COMPUTER CO., LTD.
FCC Information This device, IEEE 802.11g Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
Printed in China Imprimé en Chine PF539-4001-00 MA1108-C...