Input Settings Main Menu - Casio XJ-H1600 User Manual

Input Settings Main Menu

Setting Name Input
COMPUTER 1 R C
Terminal/
COMPUTER 2
Terminal
Video Signal/ V
S-video Signal
Signal Name R C V H D U N Single
Indicator
Restore Menu R C V H D U N Source
Defaults
Setting Unit
N Single Use this sub-menu to specify manually the type of signal being input
from the projector's COMPUTER IN 1/COMPUTER IN 2 terminal.
Auto*:
Automatically detects the signal being input from the
COMPUTER IN 1/COMPUTER IN 2 terminal and configures the
appropriate input protocol.
RGB:
Select this option when a computer is connected to the
COMPUTER IN 1/COMPUTER IN 2 terminal. For details about
connecting a computer, see "Connecting a Computer to the
Projector" in the "Setup Guide".
Component:
Select this setting when the projector's COMPUTER IN 1/
COMPUTER IN 2 terminal is connected to the component video
output terminal of a video device using a commercially available
component video cable. For information about connection, see
"Connecting to a Video Device" (page 44).
Note
The setting of this item cannot be changed while the projector
is in the 3D input mode ("3D Input Mode", page 11) or "On" is
selected for the "Option Settings 2
setting.
N Single Use this sub-menu to specify manually the type of signal being input
from the projector's VIDEO terminal or S-VIDEO terminal.
Auto*:
Select this setting to have the projector switch the video signal
system automatically in accordance with the input signal from the
video device that is connected to the VIDEO terminal or S-VIDEO
terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 / SECAM:
Each setting selects the applicable video system. Use these
settings when you want to specify only one specific video signal
for the VIDEO terminal or S-VIDEO terminal.
Use this sub-menu to specify whether or not the name of the
currently selected signal source should be displayed in the
projected image.
On*:
Select this option to turn on display of the name of the currently
selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source name.
Use this sub-menu to return all of the sub-menu items on the Input
Specific Settings main menu to their initial default settings.
Restoring menu defaults when there is no input signal will restore
defaults for the currently selected input source.
Note that the "Signal Name Indicator" setting is always returned
to its initial default, regardless of the currently selected input
source.
Description
34
Interactive Pointer"